PlasmaTEC-X OEM 

Das neue PlasmaTEC-X-System von Tantec für die atmosphärische Plasmabehandlung basiert auf dem Konzept der Hochspannungs-DC-Plasma-entladung in atmosphärischer Luft. Die Vielseitigkeit dieser Anlage ermöglicht den Einsatz in vollintegrierten Roboterzellen, als eigenständiges Gerät sowie in nahezu allen Fertigungslinien.

Das PlasmaTEC-X OEM basiert auf der Technologie der PlasmaTEC-Geräte. Das PlasmaTEC-X OEM kann ohne die PlasmaREMOTE-Steuereinheit verwendet werden. Zielgruppe sind vor allem Maschinenbauer und OEM-Kunden, die nur ein einzelnes Gerät einsetzen und keine Steuereinheit verwenden möchten. Die Steuerung und Überwachung des Geräts erfolgt über eine E/A-Schnittstelle mit 24-V-Signalen. Die Analyse der Betriebsbedingungen ist auch über eine BUS-Schnittstelle möglich.

Um eine ordnungsgemäße Plasmaentladung aus dem Düsenaustritt zu erhalten, muss die komprimierte Luft einen bestimmten Druck und ein bestimmtes Volumen haben. Das neue AirTEC-System, das in PlasmaTEC-X integriert ist, sorgt für einen jederzeit konstanten Fluss zum Düsenaustritt. Mit dem AirTEC-System passt der Generator den Luftstrom am Düsenaustritt automatisch an, unabhängig von der Kabel-/Schlauchlänge.

Beispiele

Verbesserte Druckqualität auf Plastikkarten durch Plasmabehandlung

Plasma-Oberflächenbehandlung ersetzt unsichere Beflammung

Technial specifications

FEATURES

Easy to install

The system must be connected to mains power and compressed air, no adjustment of air or power is necessary.

Standby airflow

The airflow is controlled electronically which allows for switching the on/off, A minor flow of air is part of stand-by, to avoid dust being attracted to the discharge nozzle.

Potential free discharge

Allows treatment of both conductive, non-conductive as well as semi-conductive surfaces.

Compact and Lightweight

Being compact and lightweight makes the PlasmaTEC-X easy to integrate into almost any production line or robot cell.

High-speed production

High power Plasma Discharge allows for high line speeds.

Output discharge control

Should the power drop below a pre-set level, the generator offers necessary alarm signals.

Digital and analog control signals

A large number of various signals are available on a digital interface to control and monitor the Plasma discharge at all times.

Automatic discharge air regulation

No matter the length of the power/air cable, the generator will adjust automatically to ensure the correct air pressure and flow.

 

Technical Specifications PlasmaTEC-X Generator PlasmaTEC-X Nozzle
Mains voltage and frequency 100-250VAC – 50/60Hz(Universal power input) N/A
Output voltage/power 550VA 425watt
Ramp-up time 10 ms N/A
Shut-down time < 1 ms N/A
Control interface M12 (8 pole) M12 (8 pole)
Dimensions (WxLxH) mm 150x470x198 OD30x206
Weight in kg 6,1 1,1(w. 2 mtr hose)
Treatment width in mm N/A 6-12 mm
Compressed air supply 4-8 bar, dry and clean N/A
Compressed air connection OD8mmQuick connection N/A
Air consumption N/A 33 ltr/min
Regulation compliance CE – RoHS – WEEE CE – RoHS – WEEE
lars tantec

Kontaktieren Sie schon heute unsere Plasma- und Corona-Experten